Geekpure 50 GPD RO Membrane Replacement Filter for NSF Certified Use

Product Description:

Operation Specification: - Feed Water Pressure: 40 - 100 PSI - Temperature: 40 - 110°F/5-45°C - pH: 3.0 - 11.0 - Max TDS: 1000 MG/L - Turbidity: < 1.0 NTU - Max SDI: <4.0 - Hardness: < 5 GPG - Iron: <0.1 - Lifetime: 15-24 months based on feed water quality - Shelf life: 2 years in original sealed package

Note: 1. DO NOT FREEZE. 2. Please flush the new membrane for 30 minutes to remove the protection material and stabilize the TDS of the pure water. 3. If you have chlorinated water, we recommend using a Carbon/Sediment Pre-Filter as residual chlorine can damage the membrane. In areas with high hardness, a water softener is recommended before installing the Ro unit.

Why choose Reverse Osmosis Filtration? Why choose Hidrotek brand? - High efficient filtration: Hidrotek Ro membrane rejects impurities down to 0.0001 micron, with high permeated flow and stable salt rejection. It removes up to 98% of contaminants in water, including heavy metals and fluoride. - Universal standard size: Standard size (Membrane Dimensions: 11.75" Overall Length, 1.75" Diameter), fits all Standard 2" ID Membrane housing. Compatible with most residential Reverse Osmosis Systems and water filtration systems. - Wastewater ratio is 1:2: NSF certified Thin-film composite RO membrane filters with higher water production rate. 2 gallons of wastewater will be produced for every gallon of pure water. - NSF/ANSI Standard 58 certified.

Why choose Reverse Osmosis System? - More valuable information: - The dimension of the Ro membrane is a standard size (Membrane Dimensions: 11.75" Overall Length, 1.75" Diameter), and it fits all Standard 2" ID Membrane Housings. - The suggested lifetime is 24 months for most tap water (200-500 ppm), depending on usage amount and feed water quality. For very good quality tap water (200 ppm or less), the membrane can be replaced every 36 months. In hard water areas, the membrane may be replaced every 6-12 months. It is time to replace the membrane if the flow rate is too low or the membrane is clogged. - The membrane can be used for water with Total Dissolved Solids (TDS) over 1000 ppm or very hard well water. However, the membrane should be replaced every 12 months or more frequently in such cases. It is recommended to keep the TDS levels below 1000 ppm. - The membrane is not suitable for brackish water (5000 ppm) or ocean water with high salinity (35000 ppm). For these uses, Geekpure can provide the appropriate Ro membrane. - The box contains one piece of Ro membrane. If you need membrane housing, wrench, and flow restrictor, please purchase them separately.

Different temperature, water pressure, and feed water quality affect the product water capacity and pure water quality. The pure water capacity is lower in the winter but higher in the summer. Lab test conditions: feed water pressure: 70 psi, work temperature: 77°F or 25°C, Nacl concentration: 250 ppm, recovery: 15%.

How to replace Ro membrane? 1. Remove the tube from the fitting and twist off the housing cap with a wrench. 2. Pull out the old membrane before step 2 when replacing with a new membrane (pliers may be used if necessary). 3. Push the new membrane into the housing. 4. Put the housing cap back and tighten it, then connect the fitting and tube.

Find more Ro filters and related products at Geekpure, including the DI Filter, Shower Filter, Replacement Filter Set, UV Filter, and 5-Stage Reverse Osmosis Drinking Water Filter System.

Customer Reviews: - 6th stage for Ro system, further reduce TDS to 0 ppm. - Geekpure Shower Filter reduces chlorine and hardness. - Universal compatible standard 10" reverse osmosis replacement cartridges set. - 6th stage for Ro system, 1 GPD UV Filter. - Equipped with 12 Pcs filters for 2 years of use. - 6th stage for Ro system, adjusts PH value to 7.5-9 (Ro water is about 5-6). 50 GPD Reverse Osmosis Ro membrane rejects impurities down to 0.0001 micron and reduces total dissolved minerals, including arsenic, lead, mercury, and fluoride. - NSF/ANSI Standard 58 certified. Made with polyamide film composite material. - Standard size (Membrane Dimensions: 11.75" x 1.75"), fits 1812/2012 residential RO membrane housings (2" Inner Diameter). - The lifespan depends on usage amount and feed water quality. Usually, it lasts 24 months or provides 35,000 gallons of pure water for most tap water (200-500 ppm). - Friendly design, easy installation. Suitable for most Reverse Osmosis Water Filtration Systems. - Please note to flush the new membrane for 30 minutes. - Do not freeze.

Price: - $35.99 for the 6th stage for Ro system - $15.99 for the Geekpure Shower Filter - $38.99 for the Universal Compatible standard 10" reverse osmosis replacement cartridges set - $49.99 for the 6th stage for Ro system with 1 GPD UV Filter - $159.69 for the 5-Stage Reverse Osmosis Drinking Water Filter System - $21.99 for the 10 inch inline Alkaline Filter for Ro system

Add to Cart.

product information: